Elemental Combustion Analyzer for Adsorbable Organic Halogens //

Elemental Combustion Analyzer

for Adsorbable Organic Halogens

by Microcoulometry



Category: Elemental Analyzers

Brand: Trace Elemental Instruments

Methods: ASTM D4744, ISO 11480,

ISO 9562, NEN 6401, NEN 6402


The XPLORER is designed to measure rapidly and precise in a wide range of liquid and solid matrices. It is ideal for laboratories performing Organic Halogen analysis, if necessary for round-the-clock operation. The AOX, EOX and POX modules are easily interchangeable. High throughput AOX analysis is enabled by a unique slider principle, the XPLORER simply utilizes Newton’s law of gravity, by allowing the cup or frit to ‘fall’ into the boat, before entering the horizontal furnace. When the boat returns from the furnace, the slider moves to the eject position, where the ‘burned’ cup or frit is collected for re-use, without any pile-up in the furnace tube.


ASTM D4744, DIN 38409-14, DIN 38409-22, DIN 38414-18, EN 1485, EPA 1650, BEPA 9020, EPA 9021, EPA 9023, GB/T 15959, ISO 11480, ISO 9562, NEN 6401, NEN 6402

Three different methods:

– AOX/TOX (Adsorbable Organic Halogens / Total Organic Halogens)

– EOX (Extractable Organic Halogens)

– POX (Purgeable Organic Halogens)

Dimensions (W x H x D) 36 x 27.2 x 69 cm (14.2 x 10.7 x 27.2 inch)
Weight 29 kg (64 lbs)
Voltage 100-240 V, 50-60 Hz
Power requirement (max) 1150 W
Gas connectors ⅛” Swagelok
Gases Oxygen 99.6 % (2.6), Argon 99.998 % (4.8)
Input gas pressure 3-10 bar
Internal gas pressure 1.8 bar, adjustable
Furnace voltage Dual zone, low voltage
Furnace temp. (max) 1150 °C (2100 °F)
Furnace cooling Pulling Fan, auto control
Sample introduction AOX/TOX Solid introduction by quartz boat
Sample introduction EOX Direct injection by liquids module
Sample introduction POX Introduction by POX module
Solids: 5-1000 mg
Boat driver Software controlled, adjustable
Slider/shutter driver Software controlled, adjustable
Detector SMD, Digital Coulometer
Detector accuracy Better than 2% CV
Titration cell conditioning Temperature controlled, adjustable
Software dot.NET-based, TEIS software
Ambient temperature 5-35 °C (41-95 °F)